The Modular Synthesizer SystemLanguage change

The similar to modular Synthesizer system Modular the Synthesizer system shown here is a complete music-electronic system for all kinds of music and sound production. A good operational area for modular the system is also the employment as teaching material, for the representation of physical connections in instruction and in the training.

STEPSEQUENZERSTEPSEQUENZERSTEPSEQUENZERSTEPSEQUENZERSTEPSEQUENZER
STEPSEQUENZERSTEPSEQUENZER
DUAL VOLTAGE CONTROLLED SWITCH
CLOCK DIVIDERCLOCK DIVIDERDUAL VOLTAGE CONTROLLED SWITCHDUAL VOLTAGE CONTROLLED SWITCHDUAL VOLTAGE CONTROLLED SWITCHADSR CONTROLLER
NOISEMIDI INTERFACESTEREO OUTPUT POWER SUPPLY

 

One can to click oneself the information through on the desired module or by text left in the module overview indicate let.

With the structure to clearly defined functional units and a well-thought-out arrangement of the control elements one paid attention. All modules cannot be exchanged among themselves, thus it restriction of the combination and extension possibilities give. This was realized by a uniform first shot system, with which each module receives the necessary operating voltage over the system bus. In addition the control signals gate and CV of the modules are connected by the bus system.

The inscription of the front plates is well legible and always informs about the function of the sockets, control knobs and LEDs. The modular system is in the 19" Format constructed and can be built into each (studio-)rack. For the development of the system simply additionally module carriers can be used. The front plates are aluminum colors and have standardized measures.

As sockets 4mm banana-jacks use finds, what for a Synthesizer are not completely usual. Advantage is the laboratory quality, using laboratory equipment and 100% a safe contact. Further one can use laboratory test leads, thus no special preparation and it gives also many colors further is in various modules 6,3mm plug or also XLR sockets blocked around to ensure the connection to the"universe".

The switches and control knobs are mass-produced goods, which were selected exactly however under the criteria of stability and quality. A very intensive operation can wear thus nothing to the equipment.

With the selection of the construction units for the control elements and the housing predominantly standardized mass-produced goods were used, in order to simplify an extending through own modules. A use of modules of other manufacturers in the modular system is easily possible by the use of an adapter plate.

Electronics modular of the system is developed and on as small drift and a noise as possible was optimized only with handselected construction units. All entrances and exits are insensitive to short-circuit. All modules are adjusted to the international standard of 1V/Oktave for control voltages and voltage levels from 0 to +10 V. The instrument is thus compatible with all devices after this standard.

All developed and tested modules find you in the module overview.


Backgroundmusic by MummStyleSound (Stop/Play)


Z
urück zur MUSIKSYNTHESIZER.DE Startseite !

ALLE INFORMATIONEN SIND NUR ZU LEHR-/LERNZWECKEN ZU VERWENDEN!
WARENZEICHNEN UND PATENTE GEHÖREN DEM JEWEILIGEM INHABER!
KEINE HAFTUNG FÜR FEHLERHAFTE ANGABEN UND DEREN AUSWIRKUNGEN!

Artikel, Layout & Fotos Copyright © 2001-2011 Dirk Lindhof
Disclaimer / Haftungsausschluss